You'll wonder how you ever got along without it!

Tracing Open Circuits

• Signal is being received
• Signal is not being received here
• Signal stops at the point of wire separation

Tracing Short Circuits

• Beep-beep-beep
• Signal drops at the point of the short circuit
• Beep-beep-beep
• No matter what side of the circuit you test, the Receiver will indicate the direction to the short or ground (observe LED indicator).

Circuit Wiggle and flex test

• Wiggle and twist wires to check for intermittent conditions in circuits
• Sometimes it may be necessary to check for intermittent connection problems.
• The circuit wiggle and flex test allows you to wiggle, twist, pull, push and flex wires or connectors to observe a circuit change.

Locking the reception distance

• As you bring the receiver near the transmitting signal, the tone pulses will increase in ppm (pulses per minute).
• When you reach the desired distance, depress the POWER/Sensitivity button to lock the reception at the distance you prefer.